Alright, you’ve got the green light from the universe (and your homeowner’s association). Now, walk over to your pool pump and give it a little pat. It’s about to become a hero.
First, you need to turn the pump OFF at the breaker. I’m not kidding. Don’t just hit the switch on the wall—go to the electrical panel and flip that breaker. Safety first, or as I like to say, “No zaps, only laps.”
Now, you’ll notice a big hose (or pipe) attached to the pump. That’s your discharge line. On most pumps, there’s a plug or a valve near the top of the pump housing. Unscrew that plug. Water will start trickling out—that’s fine. It’s just the pump’s way of saying “hello.”
Next, find your filter valve (usually a multi-port valve on top of the filter tank). Turn it to the “Waste” or “Drain” setting. This is the magic button. It tells the pump, “Hey, forget filtering. Just blast that water out of here.”
Now, attach a backwash hose to the waste port. Stretch that hose to where you want the water to go—away from your foundation, far from your garden, and definitely not into your neighbor’s prized petunias. Petunias hate pool water. Fact.
Pool Pump Draining Guide: DIY Maintenance Tips - craftingwithconcrete.com
